Some models allow you to set outbound policy and custom outbound rules from
Advanced>SpeedFusion VPN. See Section 14 for more information on outbound policy settings.
The local ID is a text string to identify this local unit when establishing a VPN connection. When creating
a profile on a remote unit, this local ID must be entered in the remote unit's Remote ID field. Click the
icon to edit Local ID.
To designate a custom handshake port (TCP), click the custom radio button and
enter the port number you wish to designate.
The bonded VPN can detect routing failures on the path between two sites over
each WAN connection. Failed WAN connections will not be used to route VPN
traffic. Health check packets are sent to the remote unit to detect any failure. The
more frequently checks are sent, the shorter the detection time, although more
bandwidth will be consumed.
When Recommended (default) is selected, a health check packet is sent every
five seconds, and the expected detection time is 15 seconds.
When Fast is selected, a health check packet is sent every three seconds, and the
expected detection time is six seconds.
When Faster is selected, a health check packet is sent every second, and the
To Next Page
Loading...
Need help?
General
