To Next PageTo Next Page
Need help?Do you have a question about the peplink 20 and is the answer not in the manual?
General| Load Balancing | Yes |
|---|---|
| VPN Support | Yes |
| Power over Ethernet (PoE) | No |
| LAN Ports | 4 |
| LAN Interface | 4x GE |
| Wi-Fi Standard | 802.11ac |
| PepVPN/SpeedFusion Throughput (AES 256 | 200 Mbps |
| Power Input | 12V DC |
Covers WAN, LAN, VPN, and Inbound Traffic Management features.
Lists required items and conditions before installing the Peplink Balance.
Step-by-step guide for connecting the computer, modem, and power.
Guides on LAN and WAN configuration setup procedures.
Instructions on accessing the device via its web interface using the default IP.
Step-by-step guide for initial WAN connection setup using the wizard.
Explains accessing advanced WAN settings via Network > Interfaces > WAN.
Details DHCP, Static IP, PPPoE, and Mobile Internet connection types.
Covers port speed, duplex, MTU, MSS, MAC address clone, and VLAN settings.
Explains how to configure health checks using Ping, DNS Lookup, or HTTP.
Covers profile creation and configuration for SpeedFusionTM VPN connections.
Details how to create and configure IPsec VPN profiles for secure connections.
Explains policy options: High Application Compatibility, Normal, and Custom.
Covers defining custom rules for outbound traffic management and load balancing.
Explains how to set up inbound port forwarding rules for services.
Details how to configure servers on the LAN for inbound access.
Covers defining services, protocols, ports, mapping to servers, and DNS record management.
Displays real-time WLAN status, APs, and connected clients.
Covers enabling WLAN controller, managing remote APs, and selecting APs.
Details configuring network names (SSID), security policies, and access control.
Allows customization of the captive portal page and guest account management.
Details reserving minimum bandwidth per user group and setting limits.
Explains application prioritization settings for different traffic types.
Covers creating and managing access rules for inbound and outbound traffic.
Details setting up redundant units for failover using VRRP.
Covers user accounts, password policies, and web admin access restrictions.
Instructions for performing online or manual firmware upgrades.
Addresses issues with outbound load distribution over WAN connections.
