USER MANUAL
Peplink Balance Series
11.1.2 Static IP Connection
The Static IP connection method is suitable if the ISP provides a static IP address to connect directly.
IP Address /
Subnet Mask /
Default Gateway
These settings specify the information required in order to communicate on the Internet
via a fixed Internet IP address.
The information is typically determined by and can be obtained from the ISP.
DNS Servers
Each ISP may provide a set of DNS servers for DNS lookups. This field specifies the
DNS (Domain Name System) Servers to be used when a DNS lookup is routed through
this connection.
You can input the ISP provided DNS server addresses into the DNS server 1 and DNS
fields. If no address is entered here, this link will not be used for DNS lookups.
Please refer to Section 11.3, 11.4, 11.5, and 11.6 for details about WAN Health Check, Bandwidth
Allowance Monitor, Additional Public IP Settings, and Dynamic DNS Settings respectively.
http://www.peplink.com -60 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
