peplink 20 User Manual

USER MANUAL
Peplink Balance Series
C.5 Outbound Access Restriction
C.5.1 Scenario
For security reasons, it may be appropriate to disallow LAN usersto use ftp to transfer files to and from
the Internet, or otherwise restrict outbound access.
This can easily be achieved by setting up an outbound firewall rule with Peplink Balance.
C.5.2 Solution
To setup a firewall between Internet and private network for outbound access, click the Add Rulebutton
in the Outbound Firewall Rulestable, and then make the settings according the following screenshot:
After the fields have been entered as in the screenshot, click Save to add the rule.
http://www.peplink.com -194 / 207 - Copyright © 2013 Peplink

peplink 20 Specifications

General

Load Balancing	Yes
VPN Support	Yes
Power over Ethernet (PoE)	No
LAN Ports	4
LAN Interface	4x GE
Wi-Fi Standard	802.11ac
PepVPN/SpeedFusion Throughput (AES 256	200 Mbps
Power Input	12V DC