USER MANUAL
Peplink Balance Series
23.4 Access Point
(Available on Peplink Balance 305 and 380+)
The Status of connected access point devices can be found at Status > Access Point.
It lists all connected or detected Pepwave access point devices and their IP address, firmware version,
assigned AP profile, number of connected clients and broadcasting channel.
The broadcasting channel follows by a “*” means the channel is automatically chosen and selected by the
Peplink Balance.
23.5 WINS Client
The WINS client list table is located at Status >WINS Client.
It lists WINS client IP addresses and their Names. This option will only be available when you have
enabled the WINS Server in section 9.
Name of clients retrieved will be automatically matched into Client List in the previous section.
Click the button Flush All to flush all WINS client records.
23.6 SpeedFusion
TM
Status
(Available on Peplink Balance 210+)
This is a page showing the current status of SpeedFusion
TM
, located at: Status >SpeedFusion
TM
Details about SpeedFusion
TM
connection peers would be shown as below.
You can simply click on the corresponding peer name to explore the WAN connection(s) status and
subnet information of each VPN peer.
http://www.peplink.com -179 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
