USER MANUAL
Peplink Balance Series
1 Introduction and Scope
The Peplink Balance series provides link aggregation and load balancing across up to thirteen WAN
connections.
The Peplink Balance 20/30 provides a cost-effective solution suitable for power users and home offices.
The Peplink Balance 210/310 provides advanced features for small business.
The Peplink Balance 380, 580, 710, 1350 and 2500, with a suite of advanced enterprise-class features,
make ideal single-box solutions for medium to large-sized business environments, andallow service
providers to enable highly available multi-network services.
This manual applies to the following Peplink Balance products:
Peplink Balance 20/30 (firmware version v5.4.x)
Peplink Balance 210/310 (firmware version v5.4.x)
Peplink Balance 380 (firmware version v5.4.x)
Peplink Balance 580 (firmware version v5.4.x)
Peplink Balance 710 (firmware version v5.4.x)
Peplink Balance 1350 (firmware version v5.4.x)
Peplink Balance 2500 (firmware version v5.4.x)
The manual presents how-to set up Peplink Balance, and provides a collection of case studies involving
advanced features of Peplink Balance.
Important Note to Users Upgrading from Firmware 4.7 or below
If your current firmware version is 4.7 or below, please upgrade to Firmware 4.8.2 first before upgrading to Firmware
5.3 or 5.4
Important Note to Users of Peplink Balance 30 (Classic Edition)
Firmware 5.0 or above is NOT applicable to Peplink Balance 30 (Classic Edition). For more information of
identifying the generation of your Peplink Balance 30, please visit our knowledge base at
<
http://www.peplink.com/index.php?view=faq&id=231&path=16>.
http://www.peplink.com -5 / 207- Copyright © 2013 Peplink
To Next Page
Loading...
