To Next PageTo Next Page
Need help?Do you have a question about the peplink balance 20 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Number of users | 25 user(s) |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | - |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| Dual-band | No |
| Ethernet LAN (RJ-45) ports | 6 |
| Security algorithms | 256-bit AES |
| VPN tunnels quantity | 2 |
| Product color | Black |
| AC input voltage | 110 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 15 W |
| Operating temperature (T-T) | 0 - 65 °C |
| Certification | FCC, CE, RoHS |
Weight and Dimensions| Depth | 133 mm |
|---|---|
| Width | 260 mm |
| Height | 35 mm |
| Weight | 1000 g |
Details features like WAN/LAN support, DHCP, PPPoE, and NAT.
Covers SpeedFusion, L2TP, PPTP, and IPsec VPN capabilities.
Explains Quality of Service features for traffic prioritization.
Details security features including rules, intrusion detection, and web blocking.
Guide to accessing the Peplink Balance via its web administration interface.
Step-by-step wizard for configuring WAN connections and initial settings.
Details on configuring advanced WAN connection settings.
Settings for configuring mobile internet connections via USB or built-in modems.
Details on setting up DHCP, Static IP, PPPoE, L2TP, and Mobile Internet connections.
Configures Speed, MTU, MSS, MAC Address Clone, and VLAN for WAN ports.
Configures periodic checks to ensure WAN connection health.
Configures SpeedFusion settings for secure VPN connections and bandwidth bonding.
Configuration for creating and managing IPsec VPN profiles.
Selects policies for managing and load balancing outbound traffic.
Defines specific rules for controlling outbound traffic flow.
Configures internal servers for inbound access and load balancing.
Sets up rules to forward external traffic to internal servers.
Categorizes users into groups for applying traffic policies.
Manages bandwidth reservation and limits for user groups.
Prioritizes traffic based on application type for improved performance.
Configures access rules for filtering traffic between WAN and LAN.
Manages admin and user accounts, passwords, and session timeouts.
Instructions for upgrading the device firmware via online download or manual upload.
