peplink balance 20 - Speedfusion TM Status

USER MANUAL
Peplink Balance Series
http://www.peplink.com -119 / 261 - Copyright © 2015 Peplink
13.3 SpeedFusion
TM
Status
SpeedFusion
TM
status is shown in the Dashboard. The connection status of each
connection profile is shown as below.
After clicking the Status button at the top right corner of the SpeedFusion
TM
table, you
will be forwarded to Status>SpeedFusion
TM
, where you can view subnet and WAN
connection information for each VPN peer. Please refer to Section 26.6 for details.
IP Subnets Must Be Unique Among VPN Peers
The entire interconnected SpeedFusion
TM
network is a single non-NAT IP network. Avoid duplicating subnets in
your sites to prevent connectivity problems when accessing those subnets.