peplink balance 20 - Product Features; Supported Network Features; VPN Functionality

USER MANUAL
Peplink Balance Series
http://www.peplink.com -19 / 261 - Copyright © 2015 Peplink
4 Product Features
Peplink Balance Series products enable all LAN users to share broadband Internet
connections and provide advanced features to enhance Internet access. The following
is a list of supported features:
4.1 Supported Network Features
4.2 WAN
 Multiple public IP support (DHCP, PPPoE, static IP address)
 Static IP support for PPPoE
 10/100/1000Mbps Ethernet connection in full/half duplex
 Built-in HSPA and EVDO cellular modems
 USB mobile connection (only one USB modem can be connected at a time)
 Drop-in mode on selectable WAN port with MAC address passthrough network
address translation (NAT) / port address translation (PAT)
 Inbound and outbound NAT mapping
 Multiple static IP addresses per WAN connection
 MAC address clone
 Customizable MTU and MSS values
 WAN connection health check
 Dynamic DNS (supported service providers: changeip.com, dyndns.org, no-
ip.org,tzo.com, and DNS-O-Matic)
 Ping, DNS lookup, and HTTP-based health check
4.3 LAN
 DHCP server on LAN
 Extended DHCP option support
 Static routing rules
 Local DNS proxy server
 VLAN on LAN support
4.4 VPN
 Secure SpeedFusion
TM
 SpeedFusion performance analyzer
 X.509 certificate support (feature activation required on some Balance
models)
 Bandwidth bonding and failover among selected WAN connections
 Ability to route traffic to a remote VPN peer
 Optional pre-shared key setting