USER MANUAL
Peplink Balance Series
http://www.peplink.com -126 / 261 - Copyright © 2015 Peplink
15.2 Custom Rules for Outbound Policy
Click in the Outbound Policy form. Choose Custom and press the Save button.
The following screen will then be displayed:
The bottom-most rule is Default. Edit this rule to change the device’s default manner of
controlling outbound traffic for all connections that do not match any of the rules above
it. Under the Service heading, Default to change these settings. To rearrange the
priority of outbound rules, drag and drop them into the desired sequence.
To Next Page
Loading...
