USER MANUAL
Peplink Balance Series
http://www.peplink.com -191 / 261 - Copyright © 2015 Peplink
Select Auto to allow the Peplink Balance to set the data rate automatically, or
select Fixed and choose a rate from the displayed drop-down menu.
This setting enables the filtering of multicast network traffic to the wireless SSID.
This setting specifies the transmit rate to be used for sending multicast network
traffic. The selected Protocol and Channel Bonding settings will affect the rate
options and values available here.
To allow the Peplink Balance to listen to internet group management protocol
(IGMP) network traffic, select this option.
If you use a distributed DHCP server/relay environment, you can enable this
option to provide additional information on the manner in which clients are
physically connected to the network.
Select from Gold, Silver, and Bronze to control the QoS priority of this wireless
network’s traffic.
Layer 2 refers to the second layer in the ISO Open System Interconnect model.
When this option is enabled, clients on the same VLAN, SSID, or subnet are
isolated to that VLAN, SSID, or subnet, which can enhance security. Traffic is
passed to upper communication layer(s). By default, the setting is disabled.
Band steering allows the Peplink Balance to steer AP clients from the 2.4 GHz
band to the 5GHz band for better usage of bandwidth. To make steering
mandatory, select Enforce. To cause the Peplink Balance to preferentially
choose steering, select Prefer. The default for this setting is Disable.
A
- Advanced feature. Click the button on the top right-hand corner to activate.
This setting configures the wireless authentication and encryption methods. Available
options are Open (No Encryption), WPA/WPA2 - Personal, WPA/WPA2 – Enterprise
and Static WEP.
To Next Page
Loading...
