USER MANUAL
Peplink Balance Series
http://www.peplink.com -180 / 261 - Copyright © 2015 Peplink
22 Remote User Access
Networks routed by a Peplink Balance can be remotely accessed via L2TP with IPsec or
PPTP. To configure this feature, navigate to Network > Remote User Access
Remote User Access Settings
Click the checkbox to enable Remote User Access.
Determine whether remote devices can connect to the Balance using L2TP with IPsec or
PPTP. For greater security, we recommend you connect using L2TP with IPsec.
Enter your preshared key in the text field. Please note that remote devices will need this
preshared key to access the Balance.
This setting is for specifying the WAN IP addresses where the PPTP server of the router
should listen on.
This setting allows you to define the PPTP User Accounts. Click Add to input username and
password to create an account. After adding the user accounts, you can click on a
username to edit the account password. Click the button X to delete the account in its
To Next Page
Loading...
