peplink balance 20 - Info

USER MANUAL
Peplink Balance Series
http://www.peplink.com -199 / 261 - Copyright © 2015 Peplink
 AP Controller Settings
Client Load
Balancing
Check the box to turn on client load balancing.
Coverage
Redundancy
Select the degree of coverage redundancy to use. Available values are Low, Medium,
and High.
23.4 Info
A comprehensive overview of your AP can be accessed by navigating to AP>Info.
AP Controller
License Limit
This field displays the maximum number of AP your Balance router can control. You can
purchase licenses to increase the number of AP you can manage.
Frequency
Underneath, there are two check boxes labeled 2.4 Ghz and 5 Ghz. Clicking either box
will toggle the display of information for that frequency. By default, the graphs display the
number of clients and data usage for both 2.4GHz and 5 GHz frequencies.
SSID
The colored boxes indicate the SSID to display information for. Clicking any colored box
will toggle the display of information for that SSID. By default, all the graphs show
information for all SSIDs.