peplink balance 20 - Web Access; Management Port; Admin Password; Time Zone

USER MANUAL
Peplink Balance Series
http://www.peplink.com -198 / 261 - Copyright © 2015 Peplink
length for frame aggregation. By default, it is set to 50000.
A
- Advanced feature. Click the button on the top right-hand corner to activate.
Web Administration Settings
Enable
Check the box to allow Peplink Balance to manage the web admin access information of
the AP.
Web Access
Protocol
These buttons specify the web access protocol used for accessing the web admin of the
AP. The two available options are HTTP and HTTPS.
Management Port
This field specifies the management port used for accessing the device.
HTTP to HTTPS
Redirection
This option will be available if you have chosen HTTPS as the Web Access Protocol.
With this enabled, any HTTP access to the web admin will redirect to HTTPS
automatically.
Admin User
Name
This field specifies the administrator username of the web admin. It is set as admin by
default.
Admin Password
This field allows you to specify a new administrator password. You may also click the
Generate button and let the system generate a random password automatically.
AP Time Settings
Time Zone
Check the box to allow the Peplink Balance to manage the web admin access
information of the AP.
Time Server
These buttons specify the web access protocol used for accessing the web admin of the
AP. The two available options are HTTP and HTTPS.