USER MANUAL
Peplink Balance Series
http://www.peplink.com -108 / 261 - Copyright © 2015 Peplink
12.3 Bandwidth Allowance Monitor
The Bandwidth Allowance Monitor helps track your network usage. Please refer to
Section 26.8 to view usage statistics.
Bandwidth Allowance Monitor
If Email Notification is enabled, you will be notified by email when usage hits 75% and
95% of the monthly allowance.
If Disconnect when usage hits 100% of monthly allowance is checked, this WAN
connection will be disconnected automatically when the usage hits the monthly allowance.
It will not resume connection unless this option has been turned off or the usage has been
reset when a new billing cycle starts.
This option allows you to define which day of the month each billing cycle begins.
This field is for defining the maximum bandwidth usage allowed for the WAN connection
each month.
Due to different network protocol overheads and conversions, the amount of data reported by this Peplink device
is not representative of actual billable data usage as metered by your network provider. Peplink disclaims any
obligation or responsibility for any events arising from use of the numbers shown here.
To Next Page
Loading...
