USER MANUAL
Peplink Balance Series
17.4 Captive Portal Management
A customized Captive Portal page can be configured and applied to wireless networks. To
configure,check the box at the bottom to enable the feature. Once enabled, a link for configuring Captive
Portal will be available as shown below.
Click the link configure your Captive Portal to start configuration. Once the configuration is complete,
click the button Save to save settings.
Important Note
Only one portal page customization is available for each Peplink Balance device, multiple wireless networks with
captive portal enabled will be redirected to the same portal page.
17.4.1 General
Captive Portal Settings
Captive Portal Mode
This is to specify the wireless network can be accessed by the general public or an
access account is required.
If Guess Account mode is selected, an access account is required. If Open Access mode
is selected, users can associated with this network to gain access to the Internet without
account information, a splash screen will be shown.
Free Access Quota
This option is only available if Open Access mode is selected, which specify the length of
the free access to the general public users without access accounts. The number “0”
mean the access is unlimited. The unit used is mins.
Daily Rollover Time
This option is only available if Open Access mode is selected, which specify the daily
rollover time of the free access period. All access quota will be reset at this time
specified.
http://www.peplink.com -128 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
