USER MANUAL
Peplink Balance Series
Click on the appropriate check box(es) to select the preferred WAN connection(s). Connection(s) not
selected in this step will be used as back up only. Click Next>> to continue.
Choose the time zone of your Country/Region. Check the box Show allto display all time zone options.
Check in the following screen to make sure all settings have been configured correctly, and then click
Save Settingsto confirm.
After finishing the last step in the Setup Wizard, please clickApply Changeson the page header to
allowthe configuration changes to take effect.
8.3 Advanced Setup
Advanced settings can be configured from the Network menu.
WAN connections can be configured by entering the corresponding WAN connection informationat:
Network> Interfaces >WAN
http://www.peplink.com -48 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
