2024-03
10
ARS*-B2-IA*
Product Description
Fiber Optic SFP Transceivers
Figure 2.4
The rail field switches provide 2 sockets for small form-factor pluggable (SFP) transceiver
Ethernet modules. Pepperl+Fuchs' SFP transceivers are intended to be used in applications,
where extended distances are required. The SFP transceivers fulfill enhanced requirements for
industrial use as such as installation in explosion-hazardous area, extended temperature
range, and enhanced electromagnetic compatibility (EMC).
SFP-1
• Complies with 100BASE-FX
• Transfer rate 100 Mbit/s
• Reach length of up to 2 km
• LC duplex connector
• Multi-mode fiber with 1310 nm wavelength
• Complies with a Class 1 laser product in accordance with EN 60825-1.
SFP-2
• Complies with IEEE 802.3z Gigabit Ethernet standard 1000BASE-SX
• Transfer rate 1 Gbit/s
ACC-PC-SFP Protective covers for SFP sockets (packaging unit: 10 pieces)
ACC-ARS-SW Separation wall for intrinsically safe port application (packag-
ing unit: 2 pieces)
ACC-ARS-WMK Wall mounting kit consisting of 2 mounting brackets
Table 2.2
Order designation Description
45.00
8.20
8.40
13.40
55.50
56.60
1.68
6.25
8.00
0.60+/-0.40
13.7
14.00
14.60+/-0.40
13.35
Note
Only use SFP transceivers approved by Pepperl+Fuchs for the intended use. Pepperl+Fuchs
accepts no liability as a result of performance issues related to third-party SFP solutions.
To Next Page
Loading...