Pepperl+Fuchs KCD2-STC-1.SP - Interfaces; Marking; Standards and Directives for Functional Safety

Functional Safety KCD2-STC-(Ex)1(.SP)(-Y1), HiC2025(Y1)
Product Description
2018-08
9
2.2 Interfaces
The device has the following interfaces.
• Safety relevant interfaces: input I, output I
• Non-safety relevant interfaces: none
The HART communication is not relevant for functional safety.
2.3 Marking
2.4 Standards and Directives for Functional Safety
Device-specific standards and directives
System-specific standards and directives
Note!
For corresponding connections see datasheet.
Pepperl+Fuchs GmbH
Lilienthalstraße 200, 68307 Mannheim, Germany
Internet: www.pepperl-fuchs.com
KCD2-STC-1(.SP) Up to SIL 2
KCD2-STC-Ex1(.SP)(-Y1)
HiC2025(Y1)
Functional safety IEC/EN 61508, part 1 – 2, edition 2000:
Functional safety of electrical/electronic/programmable electronic
safety-related systems (manufacturer)
Functional safety IEC/EN 61511, part 1, edition 2003:
Functional safety – Safety instrumented systems for the process
industry sector (user)