This leaflet describes procedures to convert the Peradon range of meters.
The conversion kits should contain the following items: -
Pre 2011 DCT
1 x wall bracket fitted with new coin entry plate
1 x runway
1x double sided VHB tape
Post 2011 DCT
1 x coin entry plate
ADM & SCT
1 x safety plate
1 x coin acceptor
Tools Required
No. 1 9 inch pozidrive screwdriver
Medium slotted screwdriver
Small pliers
Small hammer (DCT only)
M3.5 spanner or nut spinner (ADM & SCT)
918-001-072 Iss 1
To Next Page
Loading...
