CCTVSET2
V. 02 – 08/04/2015 8 ©Velleman nv
Transferring a Saved Snapshot onto a USB Stick
1. Insert your USB stick into one of the USB ports at the back of the DVR.
2. Search and select your snapshot as described under 7.2.7 Searching a Saved Snapshot above.
3. Left-click Backup and save the snapshot on your USB stick.
7.2.8 Record Setup
The Record Setup function allows you to record videos, either manually or programmed.
Manual Recording
1. Left-click the Record Setup icon to enter the function.
2. Select your channel and check off the manual option.
3. Left-click OK to start the recording.
4. Enter the function, uncheck the manual option and left-click OK to abort the recording.
To Next Page
Loading...