Perel VTBAL404 User Manual

VTBAL404
V. 01 – 02/10/2018 5 ©Velleman nv
6. Operation
6.1 General Operation
1. Place the scale on a solid, level and non-slippery surface.
2. Switch on the scale. The scale is ready-to-use when the
display shows 0.
3. Place the item to be weighed or the tare item in the middle
of the weighing platform.
4. To tare an item, tap the tare button. Place the item to be
weighed on the scale.
5. The weight is displayed.
6.2 Unit Conversion
Press the unit button until the desired weighing unit is displayed.
6.3 Price Calculation
1. Press the memory bank button to select a memory bank.
2. Press the memory button to enter the memory bank.
3. Enter the unit price. Press the delete button to delete your
entry.
4. Press the memory button to memorize your entry in the
memory bank. Place the item in the middle of the weighing
platform and read the results from the display.
6.4 Calibration
1. Press the calibration button until the scale enters the
calibration mode.
2. Briefly press the calibration button again. The required
weight appears on the display.
3. Place the required weight in the middle of the weighing
platform.
4. The scale will calibrate automatically and return to the
normal weighing mode.

Perel VTBAL404 Specifications

Power

battery type	2 x 1.5 V AAA batteries

Capacity and Graduation

capacity	2000 g / 4.7 lb
graduation	0.1 g / 0.003 oz
units	g / oz / ozt / dwt / ct / gn

Weight and Dimensions

dimensions	290 x 280 x 20 mm
display size	38 x 30 mm
weight	385 g