Need help?Do you have a question about the PerfectPrime IR501 and is the answer not in the manual?
General| Brand | PerfectPrime |
|---|---|
| Model | IR501 |
| Category | Thermal cameras |
| Language | English |
Instructions for downloading the IR501 Thermal Camera Viewer application.
Steps to ensure the host device supports USB OTG for automatic app launch upon connection.
Options for displaying thermal, mixed, or camera views.
Options for gallery access, image capture, and video recording.
Access the graph mode for temperature data visualization.
Accesses Manual Setting Mode to adjust various display and alarm parameters.
Option to select the temperature display unit as Celsius or Fahrenheit.
Allows selection of different color palettes for the thermal view.
Allows adjustment of emissivity for accurate temperature readings.
Configure high and low temperature alarms and enable/disable alerts.
Adjust the alignment between the camera view and the thermal view.
Option to select color palettes for the thermal view.
Rotate the thermal view to match the camera's orientation.
Choose between white or black background themes for the display.
Enable the web view function for remote access.
Display contact information, software version, and release date.
Switch between camera view and thermal view.
Use arrow buttons to fine-tune the alignment of camera and thermal images.
Exit the Camera Alignment mode.
Displays only the thermal image data.
Combines thermal imaging with standard camera photos.
Displays only the standard camera photo.
View captured images at full size by pressing thumbnails.
Tap on a specific pixel to display its temperature reading.
Select and delete multiple images from the gallery by holding thumbnails.
Select target pixels to monitor their temperature trends over time in the graph.
Customize graph display by enabling/disabling curves or changing pixel markers.
Control graph plotting, start/stop recording, and save data to the gallery.
Navigate to the Gallery section from the graph data screen.
Export graph data in Excel format for further analysis.
Access the Graph Setting Mode to configure graph parameters.
Enable storing graph data directly into an Excel file.
Define the time interval between temperature data samples.
Set the maximum number of temperature samples to record for the graph.
To Next Page