Performance Tool m558db - User Manual

WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
Some dust created by power sanding contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. An example of
this type of chemical is lead from lead based paints. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your expo-
sure: work in a well ventilated area and work with approved safety equipment, such as dusk masks that are specially designed to lter out microscopic particles.
P.O. Box 88259 Tukwila, WA 98138 • 1-800-497-0552 • www.wilmarcorp.com • Made in China • © Copyright 2010
1/2 in. Dr. Air Impact Wrench
OWNER’S MANUAL
Stock Number M558DB
SPECIFICATIONS:
Drive Size (IN.) ................................................ 1/2
Max Torque (FT/LBS) ...........................................230
Working Torque (FT/LBS)..................................... 50-200
Air Pressure (P.S.I.) .............................................90
Average Air Consumption (C.F.M.) ...................................4
Free Speed (R.P.M.).......................................... 7,500
Air inlet (N.P.T.)................................................ 1/4
Hose size (I.D.)..............................................3/8 in.
Weight (LBS) ................................................. 4.4
Specifications are subject to change without notice.

Performance Tool m558db Specifications

General

Brand	Performance Tool
Model	m558db
Category	Impact Driver
Language	English

Summary

Owners Manual

Specifications

Details the drive size, torque, air pressure, consumption, speed, inlet, hose size, and weight of the impact wrench.

Important Safety Information

General Safety Guidelines

Covers work area cleanliness, conditions, personal attire, children, storage, eye protection, and safe tool operation practices.

Maintenance and Usage Safety

Covers checking for damaged parts, maintenance by qualified technicians, and warnings about repetitive motions and chemicals.

Assembly and Installation

Connecting Air Supply

Instructions for preparing the quick-disconnect coupler, connecting the air source hose, and setting air pressure to 90 PSI.

Operation

Tool Operation

Guidance on bolt size, socket selection, forward/reverse lever, fastener binding, air regulator use, and torque setting.

Lubrication and Maintenance

Air Tool Care

Details on oiling the tool, draining water from air lines, and using the correct air supply for optimal performance.

Troubleshooting

Insufficient Power

Addresses common causes like dirty air passages, insufficient air supply, air leakage, and worn parts.

Limited Warranty