Performance Tool W50042 User Manual

24 VOLT CORDLESS IMPACT WRENCH
OWNER’S MANUAL
Item Number W50042
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product. The
owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and
while in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in English,
the product warnings and instructions shall be read and discussed with the operators’ native language by the
purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information
shall be emphasized and understood prior to usage. The product shall be inspected per the operating
instructions.
Users of this product must fully understand these instructions. Each person operating this product must also
be of sound mind and body and must not be under the influence of any substance that might impair their
vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.

Performance Tool W50042 Specifications

General

Brand	Performance Tool
Model	W50042
Category	Impact Driver
Language	English

Summary

Owner's Manual and General Warnings

General Warnings and Responsibilities

Owner/operator responsibility to study warnings, operating, and maintenance instructions for safe use and reference.

Safety Guidelines and Definitions

Signal Word Definitions

Explains the meaning of signal words (DANGER, WARNING, CAUTION, NOTICE) used in the manual for safety warnings.

Unpacking and Inspection

Guide to unpacking, inspecting the product for damage, and checking for missing parts before initial use.

Specifications

Lists key technical specifications for the 24 Volt Cordless Impact Wrench, subject to change.

Important Safety Information

Crucial safety instructions and warnings to be read and followed before operating the product to prevent injury.

Controls and Components Overview

Component Identification

Identifies and lists the main parts and controls of the 24 Volt Cordless Impact Wrench.

Symbol Definitions and Battery Operations

Symbol Definitions

Provides interpretation for various symbols that may be used on the tool for better understanding and safe operation.

Battery Pack Installation and Charging

Instructions for removing, attaching, and charging the battery pack, including important notices.

Operation and Maintenance

General Operation Warnings

Alerts users to the tool's continuous operating condition and the need to lock the trigger and remove the battery.

Installing and Removing Accessories

Guide on how to install and remove sockets or bits from the impact wrench safely.

Operating the Impact Wrench

Instructions on using the variable speed trigger switch for controlling the tool's speed and power.

Forward/Reverse Control, Care & Maintenance, and Accessories

Forward/Reverse and Trigger Lock Lever

Details on how to operate the forward/reverse lever and trigger lock for tool control and safety.

Care & Maintenance

Instructions for cleaning the tool and battery pack, emphasizing not to lubricate or open components.

Recommended Extension Cords

Guidance on selecting appropriate gauge extension cords for 120 Volt AC 60 Hz tools based on current ratings.

Warranty Information

1 Year Limited Warranty

Details of the limited warranty, exclusions, and procedures for returning defective products or parts.