4
SPECIFICATIONS
Specifications are subject to change without notice
IMPORTANT SAFETY INFORMATION
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO
SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
1. Always use eye protection when using tools. If raising dust/debris,
wear a suitable mask. Always operate tank in a safe manner, protect-
ing yourself and others in the work area from possible injury.
2.
Be sure the tank is under no pressure before removing any of the ttings.
3. Always make sure the pressure gauge/valve assembly, hose and tire
chuck are secure, and without damage to allow safe operation of the tank.
4. DO NOT OVERFILL! Use tank within its rated capacity and only for
its designated purposes. Overlling air tanks will cause premature
wear, permanent damage, injury and/or dangerous situations and
will void warranty.
5. DO NOT ll from a system charged with more than 150 PSI or from
any compressed gas cylinder.
6.
Please discard the tank, if the date stamped on the canister has passed.
7. Inspect hoses and ttings for wear and damage prior to using tool. Do
not carry or drag tank by the air hose. Keep air hose free from obstruc-
tion, twisting and binding. The hose length, which comes standard
with this model, will provide the most efcient ow of air and decrease
pressure problems in the hose and valves.
8. If a leak should develop in the tank, discard the tank immediately. DO
NOT weld on any tank designed to contain pressure.
Capacity..................................................................5 Gallons
Recommended
operating pressure ....................................... 85 to 125 P.S.I.
Air hose size .............................. 300 P.S.I. Industrial grade
Pressure gauge...........................................Industrial grade
Canister ................. Heavy Duty MIG Welded Construction
To Next Page
Loading...