8
PARTS DIAGRAM
PRESSURE
GAUGE
SAFETY PRESSURE
BYPASS VALVE WITH
MANUAL OVERRIDE
AIR HOSE
FILL STEM (Connects to standard
compressed air source)
On/Off AIR
ADJUSTMENT DIA
STANDARD TIRE
AIR CHUCK
REPLACEMENT PARTS LIST
1 W10055 Air Tank Gauge
2 W10056 Air Tank Manifold
3 W10057 4 ft. Air Hose with Chuck
# Part # Description
Drain water from hoses and compressor tank.
Condensation from the air added to the air tank will accumulate
on the inside of the tank. Eventually this may cause rusting
which will weaken the welds. Water in the air supply line will
cause gumming and power loss. Open the tank and drain
water as necessary by turning the canister upside down. Press
the needle, using a screwdriver, to drain water from tank. The
tank requires a PSI of 10-20 to drain.
Be aware of the destroy date of your tank which is located on
the side of the handle.
Be aware of and discard the tank before the destroy date.
MAINTENANCE
To Next Page
Loading...