Performance Tool W2002 User Manual

WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operating this tool. The
owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning
labels and while in use, maintaining the unit in good working order. If the owner and/or operator
are not fluent in English, the product warnings and instructions shall be read and discussed with
the operators’ native language by the purchaser/owner or his designee. Make sure that the
operator comprehends its contents. Safety information shall be emphasized and understood
prior to usage.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department
at: 1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
MINI BUTANE FLAME THROWER
OWNERS MANUAL
Stock Number W2002
Please read these instructions carefully and retain them for future use.
1. Always keep the tool out of the reach of children.
2. Never leave the tool unattended when in use.
3. Read and understand the directions completely.
4. Useonlyapprovedbutanelighteruidasfuel.
5. Keepclearofthetorchame.Theameisdifcultto
see, so work with caution.
6. Theamenozzlebecomesveryhot.Donotletittouch
your or any combustible material during and after use,
until it has cooled.
7. Toavoidoverheatingthetorch,allowshortrestperiods
between each minute (approx.) of uninterrupted use.
8. Ifambienttemperatureistoocoldorinsufcient
 oxygenisavailable,theamewillnotignite.
9. Continuously holding the torch downwards may
 extinguishtheame.
10. Never store your torch in direct sunlight. Any area
where a stove or heater generates high temperatures
should be avoided. Less than 104ºF (40ºC)
11. Disassembly,modicationormissuseoftheMini
 FlameThrowermaybehazardous.
SAFETY INFORMATION
1. Flameguardornozzle
2. Airowcontrolvalve
3. Ignition button
4. Torchsafetylock
5. Gasllervalve
1
2
3
4
5

Performance Tool W2002 Specifications

General

Brand	Performance Tool
Model	W2002
Category	Power Tool
Language	English