Performance Tool W2230 User Manual

WARNING!
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and
maintenance instructions contained on the product label and instruction manual prior to operation
of this work light. The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or
warning labels and while in use, maintaining the unit in good working order. If the owner
and/or operator are not fluent in English, the product warnings and instructions shall be
read and discussed with the operators’ native language by the purchaser/owner or his
designee. Make sure that the operator comprehends its contents. Safety information shall
be emphasized and understood prior to usage. The work light shall be inspected per the
operating instructions.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
WIDE ANGLE LED WORK LIGHT
OWNER'S MANUAL
Item Number W2230
On occasion, after printing of our literature is completed, our manufacturers may make changes
and/or modifications to merchandise which will not be reflected in this manual. Although we strive
to maintain complete and accurate information, it is possible in some instances, that the product
may differ slightly from printed specifications. Illustrations are intended for reference only. Actual
merchandise may vary. Wilmar is not responsible for typographical errors.
1
YEAR LIMITED WARRANTY
PT POWER® extends only the following warranties, and only to original retail purchasers. These
warranties give specific legal rights. Except where prohibited by local law, the law of the State of
Washington governs all warranties and all exclusions and limitations of warranties and remedies.
There may be other rights which vary from state to state.
PT POWER ® warrants the product to be free from defects in materials and workmanship under
normal use and service. A defective product may be returned for a free replacement within 90
days from the date of purchase, provided that product is returned to place of purchase
immediately after discovery of defect. After 90 days and up to one year from date of purchase, PT
POWER ® will replace at no charge any parts which our examination shall disclose to be
defective and under warranty.
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other
consumables which must be replaced under normal use and service. These warranties shall not
apply to any product or part which is used for a purpose for which it is not designed, or which
has been repaired or altered in any way so as to affect adversely its performance or reliability,
nor shall these warranties apply to any product or part which has been subject to misuse,
neglect, accident or wear and tear incident to normal use and service.
PT POWER® does not authorize any other person to make any warranty or to assume any
liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PT POWER®
makes no express or implied warranties of any kind with respect to its products. In particular, PT
POWER® makes no implied warranty of merchantability and no implied warranty of fitness for
any particular purpose, except that for goods purchased primarily for personal, family or
household use and not for commercial or business use, PT POWER® makes an implied
warranty of merchantability (and, if otherwise applicable, an implied warranty of fitness for a
particular purpose), but only for the particular qualities or characteristics, and for the duration,
expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above
limitations may not apply in all cases.
PT POWER® shall not be liable for consequential, incidental or special damages resulting from
or in any manner related to any product, or to the design, use, or any inability to use the
product. The sole and exclusive remedy for a defective product or part shall be the repair, or
replacement thereof as provided above. The laws on limitation of remedies or on consequential,
incidental or special damages may vary from state to state, so the above limitations may not
apply in all cases.

Performance Tool W2230 Specifications

General

Bulb Type	LED
Power Source	Battery
Battery Type	Lithium-Ion
Charging Time	5 hours
Color	Black

Summary

1 YEAR LIMITED WARRANTY

Warranty Coverage

Product warranted free from defects in materials and workmanship under normal use and service.

Warranty Exclusions

Excludes consumables, misuse, neglect, accidents, unauthorized repairs or alterations.

Implied Warranties

No implied warranties of merchantability or fitness, except for personal use.

Limitation of Liability

Limits liability for consequential, incidental, or special damages from product use.

WIDE ANGLE LED WORK LIGHT

Product Safety Warning

Owner/operator must study warnings & instructions before operation.

IMPORTANT SAFETY INSTRUCTIONS

Electrical Safety: Grounding

Always use a grounded 3-prong outlet to prevent shock and death.

Cord Replacement Safety

Damaged cords must be replaced only by a qualified service technician.

General Safety Precautions

Precautions to reduce risk of fire, shock, UV exposure, or injury.

Eye Safety: Direct Light Exposure

Do not look directly at the work light when it is illuminated.

Water and Shock Hazard

Avoid shock; do not use near water, keep 16 ft from pools, use GFCI circuits.

Water Resistance Limitation

The light is not waterproof; use extreme caution in wet locations.

Tripod Stability

Be careful using a tripod; ensure the area is clear of obstructions.

Cord Placement

Do not obstruct walkways or common areas with the power cord.

Label Maintenance

Maintain all labels and nameplates on the light for safety information.

Installation Restrictions

Product not intended for residential use or cabinet mounting.

Toy Safety

Product is not a toy; keep it out of reach of children.

Pacemaker Safety

Pacemaker users should consult physician; avoid operating alone.

Lead Exposure Warning

Handling cord exposes you to lead, a chemical known to cause cancer/birth defects.

Explosive Atmospheres

Do not operate in explosive atmospheres; light creates sparks that may ignite fumes.

Cord Abuse

Do not abuse cord; keep away from heat, oil, sharp edges, and moving parts.

Operator Alertness

Stay alert, use common sense; do not use while tired or under influence.

Functional Check

Do not use if On/Off button does not work; dangerous if not controlled.

Servicing and Parts

Have light serviced by qualified person; use only identical replacement parts.

Personal Protective Equipment

Wear ANSI-approved goggles during setup and use.

SETUP

Base and Bracket Assembly

Place base assembly, position U-bracket bolts, and thread bracket thumbscrews.

Light Assembly Mounting

Position light assembly and thread side bracket thumbscrews to U-bracket.

OPERATING INSTRUCTIONS

Pre-Operation Instructions

Read ENTIRE IMPORTANT SAFETY INSTRUCTIONS section before setup or use.

Powering the Light

Plug light into a standard 120V grounded outlet; use power switch to turn on/off.

Post-Operation Procedure

Turn off light, disconnect power supply after use, clean, and store indoors.

Preventing Accidental Operation

Ensure On/Off Button is OFF and tool is unplugged before maintenance.

Preventing Light Failure

Do not use damaged equipment; have problems corrected before further use.

Pre-Use Inspection

Inspect general condition: check hardware, cord, wiring, and parts for damage.

Post-Use Cleaning

Wipe external surfaces of the light with a clean cloth after use.

PARTS DIAGRAM

Component Identification

Lists and identifies all parts included in the work light assembly.