EasyManuals Logo

Performance Tool W2251 User Manual

Performance Tool W2251
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S MANUAL
Item Number W2251
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and
maintenance instructions contained on the product label and instruction manual prior to operation
of this product. The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning
labels and while in use, maintaining the unit in good working order. If the owner and/or operator
are not fluent in English, the product warnings and instructions shall be read and discussed with
the operators’ native language by the purchaser/owner or his designee. Make sure that the
operator comprehends its contents. Safety information shall be emphasized and understood prior
to usage. The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this
product must also be of sound mind and body and must not be under the influence of any
substance that might impair their vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
13 WATT FLUORESCENT WORKLIGHT
SAFETY GUIDELINES / DEFINITIONS
UNPACKING AND INSPECTION
SPECIFICATIONS
This instruction manual is intended for your benefit. Please read and follow the safety, installation,
maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents
of this instruction manual are based upon the latest product information available at the time of publication.
The manufacturer reserves the right to make product changes at any time without notice.
WARNING: Read and understand this entire instruction manual before attempting to
assemble, install, operate or maintain this product. Failure to comply with the instructions
may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed
when using this product:
DANGER Indicates an imminently hazardous
situation that, if not avoided, WILL result in death
or serious injury.
WARNING Indicates a potentially hazardous
situation that, if not avoided, COULD result in
death or serious injury.
CAUTION Indicates a potentially hazardous
situation that, if not avoided, MAY result in minor
or moderate injury.
NOTICE Indicates important information, which
if not followed, MAY cause damage to equipment.
After opening the carton, unpack your new product and related parts & accessories.
Please inspect it carefully for any damage that may have occurred during transit.
WARNING DO NOT operate this product if damaged during shipment, handling or misuse. Do not
operate the product until the parts have been replaced or the fault rectified. Failure to do so may result in
serious personal injury or property damage. All damaged parts must be repaired or replaced as needed
prior to operating this product. Check to see that all nuts, bolts and fittings are secure before putting this
product into service.
Please have the serial number, model number, and date of purchase available for reference when
calling.
Specifications are
subject to change
without notice.
Light source:...
13W 10,000-hour CFL bulb
Power Supply:...........................120V AC
Cord:....................................6 foot, 16GA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Performance Tool W2251 and is the answer not in the manual?

Performance Tool W2251 Specifications

General IconGeneral
BrandPerformance Tool
ModelW2251
CategoryWork Light
LanguageEnglish

Related product manuals