IMPORTANT SAFETY INFORMATION
WARNING. READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS PRODUCT. FAILURE TO DO SO MAY
RESULT IN FIRE, ELECTRICAL SHOCK, PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
DANGER: Do not use product near gas, combustible or explosive materials.
1. Always use common sense and pay particular
attention to all the DANGER, WARNING,
CAUTION and NOTICE statements of this
manual. The safety instructions provided are
not intended to cover all possible conditions
and practices that may occur when operating,
maintaining and cleaning power tools.
2. Observe work area conditions. Do not use ma-
chines or power tools in damp or wet locations.
Don’t expose to rain or snow. Keep work area
well lighted. Do not use electrically powered
tools in the presence of ammable gases or
liquids. Do not bring combustible materials near
the tools. Power tools create sparks, which
may ignite the dust or fumes. Do not immerse
tool in liquids. Keep work area clean, well
ventilated and well lit. Cluttered work areas
invite accidents.
3. Use personal protective equipment. Wear ANSI
approved safety goggles. Protective equipment
such as dusk mask, non-skid safety shoes,
hard hat, heavy duty work gloves or hearing
protection used for appropriate conditions will
reduce personal injuries.
4. Keep bystanders, children and visitors away
while operating this product. Distractions can
cause you to lose control.
5. Stay alert. Watch what you are doing, and
use common sense when operating this tool.
Do not use this product while tired or under
the inuence of drugs, alcohol, or medication.
A moment of inattention while operating this
product may result in serious personal injury.
Keep proper footing and balance at all times.
Do not reach over or across running machines,
hoses, cords, etc.
6.
7.
8.
9.
This product is not intended for use as a power
source. Do not exceed electrical rating of this product.
Work Safe. Operate tool a safe distance from
yourself and others in the work area. Keep
proper footing and balance at all times. Do not
overreach, especially on ladders. Be certain
ladders being used are sturdy, stable, on a rm
surface and erected as safe working angles.
Do not reach over or across running machines,
hoses, cords, etc.
Inspect tool before every use; do not use if
parts are loose or damaged.
Do not alter, splice, repair or modify this
product in any way.
10. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets
will reduce risk of electric shock.
11. People with pacemakers should consult their
physician(s) before use. Electromagnetic
elds in close proximity to heart pacemaker
could cause pacemaker interference or
pacemaker failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to avoid
electrical shock.
• Any power cord must be properly grounded.
Ground Fault Circuit Interrupter (GFCI) should
also be implemented – it prevents sustained
electrical shock.
To Next Page
Loading...
Need help?
General
