EasyManua.ls Logo

Performance Tool W54170 - Page 2

Performance Tool W54170
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING! READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS, AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO
SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
SPECIFICATIONS
Motor: ............................................... .....................12V D.C.
Power Draw: ..................................... ...............Approx. 5 A
Sound Pressure Level: ...................... .....................70 dB(A).
Vibration: .................
................................................
<2,5m/s2
Specifications are subject fo change without notice
IMPORTANT SAFETY INFORMATION
2
Max. Flow Rate:
Diesel: ...................................... ...Approx. 1.1 gal./min.
Motor Oil (100° - 125°F): ......... ...Approx. 0.8 gal./min.
The oil-extractor is the ideal equipment for quick and clean oil changes. The oil extractor works by connecting the clamps to
the 12V car battery. The oil is simply drawn out the motor through the oil dipstick bore. Please use the extractor
exclusively for motor, diesel or heating oil.
The extractor is not suitable for extracting:
Water (no lubrication of the pump)
Gearbox oil (too viscous)
Easy inflammable liquids (fuel, petrol, etc.)
Danger of explosion!
We will not assume liability for safe function of the extractor, if it is used for purposes other than those mentioned in this
manual. No warranty claims can be lodged for damage resulting from operating errors or inadequate maintenance.
Please carefully read and observe the following safety instructions, before using the extractor in order to avoid environmental
damages or injuries:
Set up the oil extractor securely
Fasten the drain hose properly
Protect the power supply cables against heat and sharp edges
Make sure that the pump is connected correctly to the car battery before starting to work (plus to plus
and minus to minus
)
Do not pump water (no lubrication of the pump)
Only pump warm motor oil (40°- 50° C, 104°- 125° F) do not pump off motor oil as long as the motor is still running
Collect the old oil in suitable containers to protect the environment and deliver the old oil to your local
collecting station, petrol station or oil supplier
Clean the pump and attachment parts after finishing your work

Related product manuals