Performance Tool W54170 - Page 3

3
PARTS DIAGRAM
PARTS LISTING
No. Description
1 Suction Probe (6mm)
2 Suction Connector
3 Drain Connector
4 Extraction Pump
5 Battery Clamps
6 On/Off Switch
7 Hose 10mm
1
2
3
4
5
6
7
The oil-extractor is a vane pump with brass lamellas. It is driven by a 12V-D.C.-motor via a reduction gear. As power supply please
use a 12V- vehicle battery. The connections on the pump are built for hoses of 10mm internal diameter.
The external diameter of the suction-probe is 6mm. Therefore the pump can only be used for oil change if the inner diameter of the
dipstick tube is bigger than 6mm. The oil-extractor is suitable to pump engine, diesel and heating oil.
TECHNICAL DESCRIPTION