Performance Tool W80578

To Next Page

PERFORMANCE TOOL extends only the following warranties, and only to original retail purchasers.

These warranties give specic legal rights. Except where prohibited by local law, the law of the State

of Washington governs all warranties and all exclusions and limitations of warranties and remedies.

There may be other rights which vary from state to state.

PERFORMANCE TOOL warrants the product to be free from defects in materials and workmanship

under normal use and service. A defective product may be returned for a free replacement within 90

days from the date of purchase, provided that product is returned to place of purchase immediately

after discovery of defect. After 90 days and up to 1 year from date of purchase, PERFORMANCE

TOOL will replace at no charge any parts which our examination shall disclose to be defective

and under warranty. These warranties shall be valid only when a sales receipt showing the date of

purchase accompanies the defective product or defective part(s) being returned. For part(s) after 90

days, please remit your request, postage prepaid to:

PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138

These warranties exclude blades, bits, punches, dies, bulbs, fuses, and other consumables which

must be replaced under normal use and service. These warranties shall not apply to any product or

part which is used for a purpose for which it is not design or which has been repaired or altered in

any way so as to aect adversely its performance or reliability, nor shall these warranties apply to

any product or part which has been subject to misuse, neglect, accident or wear and tear incident

to normal use and service.

PERFORMANCE TOOL does not authorize any other person to make any warranty or to assume any

liability in connection with its products.

Except for warranties of title and the limited express warranties set forth above, PERFORMANCE

TOOL makes no express or implied warranties of any kind with respect to its products. In particular,

PERFORMANCE TOOL makes no implied warranty of merchantability and no implied warranty of

tness for any particular purpose, except that for goods purchased primarily for personal, family

or household use and not for commercial or business use, PERFORMANCE TOOL makes an

implied warranty of merchantability (and, if otherwise applicable, an implied warranty of tness for

a particular purpose), but only for the particular qualities or characteristics, and for the duration,

expressly warranted above. The laws on limitation of implied warranties may dier from state to

state, so the above limitations may not apply in all cases.

PERFORMANCE TOOL shall not be liable for consequential, incidental or special damages resulting

from or in any manner related to any product, or to the design, use, or any inability to use the product.

The sole and exclusive remedy for a defective product or part shall be the repair, or replacement

thereof as provided above. The laws on limitation of remedies or on consequential, incidental or

special damages may vary from state to state, so the above limitations may not apply in all cases.

OWNER’S MANUAL

Item Number W80578

SELF POWERED

TIMING LIGHT

If you encounter any problems or difficulties, please contact our

customer service department at:

1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.

WARNING:

It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and

maintenance instructions contained on the product label and instruction manual prior to

operation of this product. The owner/operator shall retain product instructions for future reference.

The owner and/or operator are responsible for maintenance, maintaining all decals or warning

labels and while in use, maintaining the unit in good working order. If the owner and/or operator

are not fluent in English, the product warnings and instructions shall be read and discussed with

the operators’ native language by the purchaser/owner or his designee. Make sure that the

operator comprehends its contents. Safety information shall be emphasized and understood prior

to usage. The product shall be inspected per the operating instructions.

Users of this product must fully understand these instructions. Each person operating this product

must also be of sound mind and body and must not be under the influence of any substance that

might impair their vision, dexterity or judgment.

Protect yourself and others by observing all safety information.

Failure to comply with instructions could result in personal injury and/or property damage!

If you encounter any problems or difficulties, please contact our customer service department at:

1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.

WARNING: This product and its packaging contain a chemical known to the State of California to

cause cancer, birth defects, or other reproductive harm.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot

cover all possible conditions and situations that may occur. It must be understood by the operator

that common sense and caution are factors which cannot be built into this product, but must be

supplied by the operator. Read and understand all of the instructions provided in the instruction

manual of this product, as well as, any other tool(s) used with this product.

LIMITED WARRANTY

Need help?

Do you have a question about the Performance Tool W80578 and is the answer not in the manual?

Summary

Owner & Operator Safety Instructions

Study All Instructions and Warnings

Owners/operators must study all warnings, operating, and maintenance instructions before use.

User Competency and Safety

Users must understand instructions and be fit in mind/body to operate the product safely.

Important Safety Information

Work Area and Conditions

Maintain a clean, well-lighted work area, avoiding flammable materials and liquids.

Personal Safety Precautions

Use common sense, avoid loose clothing/jewelry, maintain safe distance, and wear eye protection.

Prohibited Operation Conditions

Do not operate under the influence of alcohol or drugs; check prescription effects.

Operating Instructions

Preparation Steps

Prepare the timing light by installing batteries and checking power indicators.

Timing Measurement Procedure

Connect the spark plug clamp, start the engine, and direct the flash onto timing marks.

Timing Adjustment Process

Loosen distributor, adjust while engine runs, align timing mark, and tighten securely.

The Self Powered Timing Light, Item Number W80578, is a diagnostic tool designed to help users accurately set and check the ignition timing of automobile engines. Its primary function is to provide an ultra-bright flash that illuminates engine timing marks, allowing for precise observation and adjustment of the engine's timing. This is crucial for optimizing engine efficiency, power, and fuel economy.

Function Description:

The timing light operates by detecting the spark from the #1 spark plug and emitting a synchronized flash. This flash momentarily "freezes" the engine's rotating timing marks, making them visible against a stationary pointer on the engine block. By comparing the position of these marks to the manufacturer's specifications, users can determine if the engine's ignition timing is correct. If the timing is off, the tool facilitates its adjustment by guiding the user to rotate the distributor until the marks align with the specified setting. The device is self-powered, using D-cell batteries, which eliminates the need for an external power source from the vehicle's battery, simplifying its connection and use.

Important Technical Specifications:

Power Source: Self-powered by two SUM-1 or "D" size dry batteries (or Ni-Cr batteries).
Light Source: Utilizes a special Xenon bulb, providing an ultra-bright flash for visibility in various lighting conditions, including daylight.
Spark Plug Clamp: Designed to connect to the #1 spark plug wire. It features an arrow indicating the direction of connection towards the spark plug. The clamp is noted to be fragile and should be handled with care.
Indicator Lamp: An ON/OFF indicator lamp confirms sufficient battery power when the trigger is depressed. A dim or non-illuminating lamp indicates insufficient battery power.
Portability: Being self-powered, the device offers enhanced portability and ease of use without needing to connect to the vehicle's electrical system directly for power.

Usage Features:

Ease of Connection: The timing light requires only one connection: the spark plug clamp to the #1 spark plug wire. This simplicity makes it user-friendly.
Battery Operation: The use of D-cell batteries provides convenience and eliminates the need for long power cables or direct vehicle battery connections, which can be cumbersome in some engine compartments.
Clear Indication: The bright Xenon flash ensures that timing marks are clearly visible, even in bright ambient light, which is a significant advantage over less powerful timing lights.
Timing Adjustment Guidance: The manual provides clear steps for adjusting the distributor to correct timing, including loosening the distributor bolt, rotating it incrementally, and re-tightening.
Safety Warnings: Comprehensive safety warnings are provided, emphasizing caution around moving engine parts, hot surfaces, and electrical components. Users are advised to wear eye protection and ensure the work area is clean and well-lit.
Pre-Operation Checks: Before use, users are instructed to ensure the engine is at normal operating temperature and, if required by vehicle specifications, to disconnect and plug the vacuum line to the ignition distributor's vacuum advance.
Battery Check: A pre-use battery check is incorporated, where depressing the trigger should illuminate an indicator lamp, confirming adequate battery power.
Troubleshooting: The manual addresses common issues like insufficient battery power and provides guidance on replacing batteries.

Maintenance Features:

Battery Replacement: The device is designed for user-replaceable batteries. The manual instructs on how to access the battery compartment and replace the SUM-1 or "D" size batteries. It also warns against mixing used and new batteries.
Xenon Bulb Replacement: In some models, the Xenon bulb is user-replaceable, reducing the need to return the light for service if the bulb fails. This feature contributes to the longevity and cost-effectiveness of the tool.
Durability Considerations: While the spark plug clamp is noted as fragile, the overall design aims for reliability under normal use and service.
Warranty Information: A limited warranty covers defects in materials and workmanship for up to one year from the date of purchase, with provisions for free replacement within 90 days and free parts replacement thereafter. This indicates manufacturer confidence in the product's durability and offers recourse for manufacturing defects.
Consumables: The warranty explicitly excludes consumables like bulbs, indicating that these are expected to be replaced by the user over time due to normal wear and tear.
Care and Handling: Implicit maintenance includes careful handling, especially of the spark plug clamp, to prevent damage. Keeping the tool clean and stored properly would also contribute to its lifespan.
Customer Service: Contact information for customer service is provided for users encountering problems or difficulties, facilitating support and potential repairs or replacements under warranty.

The Self Powered Timing Light is presented as a reliable and user-friendly tool for automotive enthusiasts and professionals alike, designed to simplify the critical task of engine timing adjustment with its self-contained power, bright illumination, and straightforward operation.