- 12 -
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE TROUBLESHOOTING
Symptom Possible Causes Corrective Action
Vacuum will not operate. 1) No power supply. 1) Check power supply – cord,
breakers, fuses.
2) Faulty power cord. 2) Unplug and check the power
cord. If damaged, have it repaired
by a professional.
3) Container full. 3) Empty container.
4) Switch in the wrong position 4) Press the ON ‘I’ button on the
power head.
Dust comes out from motor cover. 1) The cartridge filter is missing or
damaged.
1) Attach or replace cartridge filter.
Reduced efficiency and
motor/speed vibration.
1) There is a blockage in the
nozzle, hose, or the container inlet.
The cartridge filter is clogged by fine
dust.
1) Check nozzle, hose and
container inlets for blockage. Take
off the filter and clean it. Or install
new cartridge filter.
Remote will not operate. 1) Battery is dead. 1) Replace the battery.
To Next Page
Loading...
Need help?
General