Performax 241-1395 User Manual

9
BATTERY CHARGE INDICATOR – cont’d
Red + Amber + Green (3, 4 & 5) – 2/3 to
full capacity
Red + Amber (3 & 4) – 1/3 to 2/3 capacity
Red (3) – less than 1/3 capacity
3. Release the battery status button to
turn the LED’s OFF.
PIVOTING HANDLE
To change the pivoting handle to the "in
line" position, press and hold the pivoting
handle release button (1) and rotate
handle (2) clockwise (Fig 3). Release the
button and continue to rotate the handle
180°. The release button will lock the
handle in the "in line" position when the
handle is fully rotated 180°. Reverse these
actions to return the handle to the pistol
grip configuration.
ROTATION DIRECTION SWITCH
Press the rotation direction switch (1) to
the right to make the spindle rotate counter
clockwise (Fig. 4). Press the rotation
direction switch to the left to make the
spindle turn clockwise.
NOTE: If the rotation direction switch is left
in the middle position, the tool will not
operate.
TRIGGER SWITCH
Squeeze the trigger switch (2) to turn the
tool ON (Fig. 5). Release the trigger switch
to turn the tool OFF.
NOTE: If the rotation direction switch is left
in the middle position, the tool will not
operate.
ASSEMBLY & OPERATION
Fig. 4
Fig. 2
Fig. 3
Fig. 5

Performax 241-1395 Specifications

General

Brand	Performax
Model	241-1395
Category	Power Screwdriver
Language	English