9
Improper connection of the equipment-grounding conductor can result
in a risk of electric shock. The conductor with insulation having an outer
surface that is green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the electric cord or plug
is necessary, do not connect the equipment-grounding conductor to a live
terminal.
Check with a qualified electrician or service personnel if the grounding
instructions are not completely understood, or if in doubt as to whether the
tool is properly grounded.
Repair or replace a damaged or worn cord immediately.
The following items are to be provided in the shipping box: (Fig.2)
A. Grinder(not shown)
B. Eyeshield assembly w/ magnifying lens, left
C. Eyeshield assembly, right
D. Tool rest, left
E. Tool rest, right
F. Carriage bolt(2)
G. Tool rest knob(2)
H. Eyeshield knob(2)
I. Flat washer(4)
J. Lock washer(2)
B
C
D
E
F
G
H
I
J
CARTON CONTENTS
Fig.2
To Next Page
Loading...
General