0166ES | 03/2019 | 6 of 6MOHAWK TECHNICAL SERVICES DEPARTMENT | 508 EAST MORRIS STREET, DALTON, GA. 30721 | 888.387.9881
Pergo Extreme Installation Instructions
Maintenance (cont.)
3. Protect the floor from furniture and chair legs by using felt pads and coaster
protectors. Ensure chairs with castors have suitable soft rubber wheels. Replace
hard or plastic castors with soft wheels designed for a vinyl floor and/or use a
suitable desk mat.
Never drag heavy items of furniture over the floor, always lift instead. Make sure furniture
legs have a large surface area in contact with the floor and are axed with non-staining floor
protectors. The taller and wider the furniture feet are, the greater the disbursement of weight,
which helps avoid damage to the floor.
4. Ensure that the indoor room temperature is always
maintained between 0 and 140°F (-17 and 40°C).
Place non-rubber backed mats at all outside entrances to prevent dirt, grit and soil from being
tracked onto your floor. This will help keep the floor clean and extend the life of your floor.
Do not allow cigarettes, matches or other very hot items to contact the floor as this may
cause permanent damage. Also, prolonged contact with items made from rubber can cause a
permanent stain on the floor.
For technical assistance please contact your flooring dealer or Mohawk Technical Services at
888.387.9881, option 3.
Pergo Extreme
0 & 140ºF (-17 & 40ºC)
To Previous Page
Loading...