Perkins D6500 - SSP I - B (D6500) Lifter Specifications

Perkins Manufacturing Company 800-882-5292
Creators of the TuckAway® Cart Lifter
www.perkinsmfg.com
Revised: 5/7/2019
Page 2
SSP I – B (D6500) Lifter Specifications
Cart Compatibility
ANSI Type B, US-Style two-bar carts having a bar
to bar dimension of 14 ¾ - 15 ¼”.
Typical Mounting Application
Rearloader
Tipper-Bar Compatible?
No.
Flow Rate Requirement
3.5 gpm
Cycle Time
6-8 seconds (up and down)
Recommended Pressure Setting*
1,550 psi at the pressure relief valve
Weight Capacity**
400 lbs
Dump Angle
50 degrees from the horizon
Mounting Height (ground level to top of mounting
plate)
39-1/2”.
Approximate Unit Weight (not counting
packaging)
115 lbs
Hydraulic Package
Tap-In kits are sold separately
Warranty
1-year ***
Perkins regularly makes product improvements. Specifications are subject to change without notice.
* Actual pressure required to lift a load can vary.
** Do not lift more than the recommended amount printed on the cart by the cart manufacturer or
damage or injury may result.
*** See Warranty page enclosed in this manual for full details of coverage