10
8. PREPARING THE ICEMAKER FOR LONG STORAGE
WARNING
Drain the Ice Maker to prevent damage to the water supply line at subfreezing
temperatures, using air or carbon dioxide. Shut off the Ice Maker until proper
air temperature is resumed.
1) Close the Water Supply Line Shut-off Valve, and open the Drain Valve.
2) Move the Control Switch to the “OFF" position.
3) Blow out the water supply line and the internal water circuit.
Note: This procedure is necessary to protect the Ice Maker from freezing up at subfreezing
temperature.
4) Unplug the Ice Maker.
5) Remove all ice from the Storage Bin, and clean the Bin.
6) Close the Drain Valve.
Fig. 7
Icemaker
Shut-off Valve
Drain Valve
Air or CO2
To Next Page
Loading...
