Perlick SIGNATURE 15 Series Kit Installation

NOTE: EXTENSION OF LEG LEVELERS
WILL INCREASE ASSEMBLY HEIGHT
68
7
8
"
95010 REV C
sheet metal screws (where the rivets were drilled out in step 1).
in step 2) by using 1/4-20 machine screws . Flange should be
STACKING KIT INSTALLATION
pointing away from the bottom of the unit.
Step 3: Attach mounting plate (where the leg levelers were removed
Step 4: Place upper unit on top of lower unit and attach using #10
-3-
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com
Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning
Flange
Bottom of
cabinet

Perlick SIGNATURE 15 Series Specifications

General

Brand	Perlick
Model	SIGNATURE 15 Series
Category	Refrigerator
Language	English