To Next PageTo Next PageTo Previous PageTo Previous Page
Why is my Perlick SIGNATURE 15 unit not running?
Your Perlick refrigerator might not be running because no power is going to the unit. Check if the home circuit breaker was tripped and reset it. Also, verify the ON/OFF keypad is turned on. If you have a Dual-Zone model, inspect the Dual-Zone power switch. Another potential cause is a dirty condenser, which requires cleaning.
Why are my Perlick SIGNATURE 15 Refrigerator compartments warmer than usual?
If your Perlick Refrigerator compartments are warmer than usual, several factors could be responsible. The control preset might be set too warm, so try lowering the setpoint temperature. Ensure the light isn't staying on by turning off the manual light switch. A dirty or obstructed condenser can also cause this issue, so clean the condenser and clear any obstructions. If the door has been opened frequently, wait 24 hours and recheck the temperature. Also, make sure that internal louvers and/or the fan guard are not obstructed. If warm product was recently placed inside, allow 24 hours for it to chill before rechecking the temperature.
General| Brand | Perlick |
|---|---|
| Model | SIGNATURE 15 Series |
| Category | Refrigerator |
| Language | English |
