16
To help correct for the offset of a skirting board or baseboard,
Spacers will be required. Measure the width of your skirting/
baseboard and use the closest number of Spacers to t this width.
Each Spacer is 3/16” (5mm) thick.
Follow step 1 & 2 from “Installation Inside Doorway or Opening”,
align Spacers and Mounts in their correct position, use a Phillips
screwdriver to tighten Screws until each Mount is secure.
Additional wall Spacers are available from after sales support.
3/16”
(5mm)
STEP 4: WITH
SKIRTING OR BASEBOARD
INSTALLATION
Note: Only use
Spacers for the
Upper Gate
Mount and the
Upper Catch
Mount.
To Next Page
Loading...
