6
MOUNTINGS
Gate must be installed in a structurally sound opening.
Ensure mounting surface (wall, door frame, stair posts, etc.) is
strong, rigid and has an even surface.
Note: If using gate on stairs, it must be placed either on the top
step or on the lowest step at the bottom.
Select the appropriate xing method from the following list.
Drill 5/64’’ (2mm) pilot holes
and use the wood screws
provided screwing directly
into the wood.
WOOD MOUNTING
Locate the wood stud and
follow the wood mounting
instructions. Do not mount
into dry wall without
additional support.
DRY WALL MOUNTING
Wood Screws
FOR INSTALLATION
SAFETY INFORMATION
To Next Page
Loading...
