11
Step 7
• Note: The lid knobs (A) are pre-attached to the lid (B). Flip the lid upside down to reveal
the lid knobs.
• Please remove the knobs using a Phillips head screwdriver and re-assemble them on
the lid right-side up.
• Attach the drainage plug (L) to the body (D). Tighten with the provided double open-end
wrench.
• Please be sure to install one rubber gasket on each side of the body basin and tighten the
nut snugly with the provided wrench to prevent leaks.
Double Open-End
Wrench
To Next Page
Loading...