Hardware
The following hardware is provided in a poly bag.
M6x13mm Bolt: 18 pcs
M6X16mm Bolt: 4 pcs
M6x15mm Shoulder Bolt: 2 pcs
Tools Included:
M4x32mm Screw: 2 pcs
(Note: These screws are pre-attached to the lid knobs, please refer to page 11 for more details.)
Tools
The following tools are required for assembly:
• Allen wrench (provided)
• Double open-end wrench (provided)
• Phillips screwdriver (not provided)
To Next Page
Loading...