How to fix a Permobil C400 that does not start?
If your Permobil Wheelchair isn't starting, it might be due to discharged batteries. Try charging the batteries. Alternatively, the cable connection to the control panel may have become loose; ensure it's securely attached.
Why my Permobil C400 Wheelchair can not be driven?
If your Permobil Wheelchair can't be driven, first check if the battery charger is connected. If it is, terminate the charging and remove the charging cable from the charging outlet. Also, make sure the wheel lock release is not activated; if it is, reset it. Finally, ensure the wheelchair is unlocked.
What to do if Permobil C400 Wheelchair battery voltage indicator is blinking?
If the battery voltage indicator on the control panel of your Permobil Wheelchair is blinking once every 2.5 seconds and the wheelchair cannot be driven, the control system is likely in Sleep Mode. To resolve this, switch the start button on the control panel off and on again.
General| Brand | Permobil |
|---|---|
| Model | C400 |
| Category | Wheelchair |
| Language | English |
Contact dealer or Permobil for technical problems.
Spare parts must be ordered through your dealer.
Contact dealer or Permobil for warranty information.
See Owner's Manual for maintenance information.
Chassis identification number location.
Pilot+ controller identification number location.
Control panel Pilot+ identification number location.
Control panel VSI identification number location.
Steps to remove the seat elevator cover.
Steps to remove the chassis cover.
Steps to remove the front fender.
Steps for removing wheelchair batteries.
Steps for fitting wheelchair batteries.
Steps for removing the front wheel.
Steps for fitting the front wheel.
Steps to replace the inner tube of the front wheel.
Procedure for filling the tire with air.
Steps for removing the rear wheel.
Steps for fitting the rear wheel.
Steps to remove support wheels.
Steps to remove the entire support wheel unit.
Steps to fit support wheels.
Steps for removing the wheel fork.
Steps for fitting the wheel fork.
Steps for removing the rear wheel suspension.
Steps for fitting the rear wheel suspension.
Steps for removing shock absorbers.
Steps for fitting shock absorbers.
Adjusting shock absorber spring force based on user weight.
Steps to remove slewing brackets.
Steps to fit slewing brackets.
Steps to remove the wheel lock release cable.
Steps to fit the wheel lock release cable.
Steps to remove the wheel lock release sensor.
Steps to fit the wheel lock release sensor.
Steps to remove the magnetic wheel lock.
Steps to fit the magnetic wheel lock.
Steps to remove the drive motor.
Steps to fit the drive motor.
How to manually adjust the seat elevator.
Steps to remove the seat elevator unit.
Steps to fit the seat elevator unit.
Steps to remove the seat elevator cable.
Steps to fit the seat elevator cable.
Steps to remove the seat elevator motor.
Steps to fit the seat elevator motor.
Steps to remove the seat elevator drive belt.
How to adjust the seat elevator drive belt tension.
How to adjust the fixed seat post height.
Steps to remove the fixed seat post.
Steps to fit the fixed seat post.
Steps to remove the Pilot+ control panel.
Steps to fit the Pilot+ control panel.
Steps to remove the seat control panel.
Steps to fit the seat control panel.
Steps to remove the VSI control panel.
Steps to fit the VSI control panel.
Steps to remove the Pilot+ controller.
Steps to fit the Pilot+ controller.
Steps to remove the SLS drive stage.
Steps to fit the SLS drive stage.
Location and replacement of the main fuse.
How to reset the circuit breaker.
Steps to replace the SLS fuse.
Steps to replace the charging fuse.
Steps to remove the front lights.
Steps to remove the rear lights.
Interpreting battery voltage indicator error signals.
Wiring diagram for VSI system.
Wiring diagram for Pilot+ system.
Distribution chart for VSI system.
Distribution chart for Pilot+ system.
To Next Page
