Permolock C3 Owner´s Manual Safety instructions
9
To be checked before first use
Before using your wheelchair with Permolock C3, you must check that the chair
has been suitably adjusted. Contact your supplier for information.
To be checked before setting off
Check that the light on the control button in the vehicle is green after locking
has been activated.
Fitting
Permolock C3 should be fitted by a competent service engineer or a person
with adequate knowledge to perform the adjustment in an expert manner.
Maintenance and service
Carry out only the service and maintenance activities indicated in this user
manual. All other servicing, alterations and changes to the vital systems of
Permolock C3 and its accessories must be carried out by a competent service
engineer or a person with adequate knowledge to perform the adjustment in an
expert manner. In case of doubt, always contact a competent service engineer
or Permobil.
Use only spare parts or accessories approved or recommended by Permobil.
All other use could lead to changes which might impair the function and safe-
ty of the docking system. It could also lead to the warranty for your Permolock
C3 becoming invalid.
WARNING
Recycling of electronic items
Obsolete electronics should be disposed of responsibly in accordance with
local recycling regulations.
EMC requirements
The electronics in the vehicle locking system may be affected by external elec-
tromagnetic fields. Likewise the electronics in the locking system themselves
may emit electromagnetic fields which could affect the surrounding area.
The threshold values for Electro-Magnetic Compatibility (EMC) relating to elec-
tric wheelchairs and their accessories are laid down in harmonized standards
under EC Directive 93/42/EEC Medical Devices.
Permolock C3 meets these threshold values.
WARNING
Safety instructions
To Next Page
Loading...