What to do if the Permobil Permolock C3 Docking Station does not unlock when the control button is pressed?
If the Permobil docking station fails to unlock when you press the control button, it might be due to an electronics fault. Try resetting the system by pressing the control button for 10 seconds. If the issue persists, further assistance is needed.
Why is the light flashing red on my Permobil Permolock C3 Docking Station locking plate control button?
A flashing red light on the locking plate control button of your Permobil docking station indicates an electronics fault. To resolve this, reset the system by pressing the control button for 10 seconds. If the problem continues, further assistance is needed.
What to do if wheelchair is not locked in position in Permobil Permolock C3?
If your wheelchair isn't locking into position in the Permobil Permolock C3, check that the manual release lever is in the closed position. If the issue persists, further assistance is needed.
Why is the light on the Permobil Docking Station locking plate control button shining red during manual release?
If the light on the locking plate control button shines red during manual release, it means that the locking mechanism is not in the locked position. Ensure the locking mechanism is locked and that the wheelchair is either fully inside or outside of the docking system.
How to adjust Permolock C3 if the wheelchair doesn't fit?
If your wheelchair doesn't fit into the Permolock C3 when driving over the docking system, the height might be incorrectly adjusted. Adjust the height of Permolock C3.
What does it mean if the light on the Permobil Permolock C3 locking plate control button flashes irregularly?
If the light on the locking plate control button flashes irregularly, it means that the tension spring is broken or the locking mechanism’s locking arm is loose. Further assistance is needed.
Explains the purpose and meaning of warning labels used in the manual for potential hazards.
Essential checks before first use and before setting off to ensure safe operation of the docking system.
Guidance on proper installation and maintenance procedures for the docking system by qualified personnel.
Describes the two main units of the Permolock C3 and its operational modes for vehicle docking.
Explains the primary safety function of the docking system and the need for proper wheelchair adjustment and testing.
Details the three primary methods for controlling the Permolock C3 docking system.
Step-by-step instructions for correctly driving the wheelchair onto the docking system and securing it.
Procedures for electronically releasing the docked wheelchair using the control button.
Instructions on how to manually release the wheelchair if the vehicle's battery is flat or electrical systems fail.
Steps for performing an emergency manual release of the wheelchair using the designated control.
Explains the visual and auditory signals from the control button before docking and their associated causes/actions.
Details the control button signals during the docking process and the required actions for correct securing.
Continues explaining control button indicators during docking, focusing on red light signals and their resolutions.
Lists and describes optional accessories like chair bases and manual release handles for enhanced functionality.
Details accessories such as advanced control buttons, reinforcement plates, extension cables, spring pins, and floor spacers.
Provides general advice for cleaning the docking system and specific warnings about water damage to electronics.
Lists the physical dimensions, weight, and electrical system specifications of the Permolock C3.
How to identify if a wheelchair chassis is prepared for fitting reinforcement plates and pins.
Step-by-step guide for attaching reinforcement plates to the C350 wheelchair chassis.
Detailed instructions for installing the spring pins onto the underside of the wheelchair chassis.
General guidelines for mounting the docking system in the vehicle, considering height adjustment and vehicle floor compatibility.
Instructions on how to physically secure the docking system to the vehicle floor and connect its electrical system.
Explains how to adjust the locking plate's height to six different positions for optimal docking.
Details specific height positions (1-5) for the locking plate and their suitability for different vehicle and docking scenarios.
Details specific height position (6) for the locking plate and its use on sloping surfaces.
Guidance on adjusting screws for securing the docking system on sloping surfaces to prevent spring-forward movement.
How to install floor spacers to facilitate wheelchair movement on sloping surfaces.
Instructions for installing the manual release lever, ensuring correct orientation for safety.
Steps to adjust the manual release mechanism for installation on either the right or left side of the vehicle.
Visual guide and angular limits for correctly fitting the manual release lever for optimal function and safety.
Exploded view and part list for the manual release lever assembly, with item numbers and descriptions.
Detailed list of parts for the manual release lever, including item number, quantity, art. no., and description.
Exploded view of the main docking system parts, showing numbered components for identification.
Detailed list of parts for the main docking system, including item number, quantity, art. no., and description.
Exploded view of adjustment devices, screws, and cabling components for the docking system.
Detailed list of parts for adjustment devices, screws, and cabling for the docking system.
Guide to identify and resolve common issues with the docking system based on events, possible causes, and actions.
Report detailing sled test results for Permolock C3 with a Permobil C300 wheelchair per SAE J2249 standards.
Report detailing sled test results for Permolock C3 with a Permobil C300 wheelchair per ISO 10542 standards.
Report detailing sled test results for Permolock C3 with a Permobil C350 Corpus R-net wheelchair per SAE J2249.
Report detailing sled test results for Permolock C3 with a Permobil C350 Corpus R-net wheelchair per ISO 10542.
Report detailing sled test results for Permolock C3 with a Permobil C350 Corpus R-net wheelchair (reversed) per ISO 10542.
Report detailing sled test results for Permolock C3 with a Permobil C350 Corpus R-net wheelchair (reversed) per SAE J2249.
General| Compatibility | Permobil wheelchairs |
|---|---|
| Material | Steel |
| Mounting | Floor-mounted |
| Safety Features | Locking mechanism |
| Function | Securely locks a wheelchair to a vehicle floor, providing stability and safety during transportation |
To Next Page