Persistent Systems Wave Relay MPU5 - Configuring the Management Computer (Linux)

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
PAGE 48 OF 176
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
1
Open the command line.
2
Type:
sudo ifcong eth0 10.4.1.10/24
Configuring the Management Computer (Linux)
3
Type:
sudo ip addr add 10.3.1.10/24 dev eth0
What Can I Do Now?
✓
▶ Configure computers to be able to communicate with Wave Relay
®
devices.
▶ Have a computer that is able to configure a Wave Relay
®
device.
SOFTWARE SETUP: MANAGEMENT COMPUTER